Canon EOS R50 V Camera Settings
Use the instructions below to change the camera settings required for proper communication between the Ortery software and compatible camera.
1. RF Lens Settings
The Canon RF-S14-30mm F4-6.3 IS STM PZ Lens does not have physical toggles on its side (this step can be skipped in that case). If using a Canon lens with toggles, set:
1. Set Camera Focus toggle to AF.
2. Set the Image Stabilizer to OFF. (when using a tripod or mounting it on an Ortery system)
2. Camera Power Source
Instead of batteries, we strongly recommend using an AC power adapter to power the camera while using the Ortery software.
3. R7 Camera Body Settings
- Set the dial on the top of the camera, on the right of the viewfinder, to the Camera icon. On the back of the camera, use the screen to change the shooting mode to M for Manual.
4. Clear Camera Settings
1. Under the 4th submenu in the Set-up menu, select "Reset Camera"
2. Then select "Basic Settings"
3. Then confirm "Clear all camera settings"
5. Turn Off Power Saving Mode
1. Under the 3rd submenu in the Set-up menu, select "Power saving"
2. Then select "Auto Power Off"
3. Then select "Disable"
6. Disable Auto Rotate
1. Under the 1st submenu in the Setup menu, select "Auto rotate"
2. Then select "Off"
7. Set Auto Focus
1. Under the AF menu, select "AF Operation"
2. Then select "ONE SHOT"
3. Under the 1st submenu, select "AF area"
4. Then select "1-point AF"
8. Turn Off Image Stabilizer
1. Under the 7th submenu, select "IS (Image Stabilizer) mode"
2. Then set both settings to "Off"
Set EOS R50 V Movie Mode
Note: For video recording with an Ortery device, you will need an SD card installed in the camera.
Adjust the dial on the camera body
to Movie Mode
Under the 1st submenu, select "Movie rec. size"
Then select the desired resolution (4K or FHD)
with the desired frame rate (30 or 60 FPS)
Not Sure What You Need?
Let our sales team help you make an informed decision